Supplying Papermakers Worldwide • Trim Nozzles • Edge Trimming Machines • Water Supply Systems
About Us Products Contact Us Home Site Map  
 
Tips and Pointers
1) 

To decrease splashback on the trim nozzle, place it over a vacuum box. If you want a double stream nozzle to fit in the vacuum slot use our parallel stream nozzle
(see products/doubles/stream detail)

 

2) 

The most common reason for trim nozzle failure is poor water quality. Proper water filtering is critical for optimum nozzle performance.

 

3) 

The most effective trim nozzle set-up is realized by aiming the stream slightly toward the outside of the wire and slightly toward the dry end of the machine.

 

4) 

To minimize sweating on the pipe, consider using trim water at stock temperature.

 

5)  Extreme care must be taken with application of teflon tape when changing a nozzle. To avoid plugging the small orifice with teflon tape, do not apply tape over the end of the last thread.

TO PLACE YOUR ORDER
From the USA
Call: 1-800-788-9458
Fax: (503) 648-8974
E-Mail: info@trimnozzle.com

Outside the USA
Visit our Contact Us Page



6100 NE Cherry Drive • Hillsboro, OR 97124 U.S.A. • 1-800-788-9458 • (503) 648-8389 • Fax (503) 648-8974 • E-Mail: info@trimnozzle.com